Service Parts By Russell Performance |
|
TEFLON WASHERS
Replacement teflon washers for Russell Performance Bulkhead Fittings. |
 |
| Application |
Quantity |
Part # |
| -6 AN Teflon Washers |
10 |
651206 |
| -8 AN Teflon Washers |
10 |
651208 |
| -10 AN Teflon Washers |
10 |
651210 |
| -12 AN Teflon Washers |
10 |
651212 |
|
|
COPPER CRUSH WASHERS
For use with Edelbrock Billet Fuel Pumps, Carter and CV Pumps. |
 |
| Application |
Quantity |
Part # |
| Copper Crush Washers for use with 5/8-18 Male Fitting |
2 |
640990 |
|
|
VITON® AND FLUOROSILICONE O-RINGS
Replacement O-rings for use with dry sump fittings, straight threaded AN plugs and flare unions. Viton O-rings are compatible with gasoline. Fluorosilicone O-rings offer superior sealing and are the best choice for use with ethylene glycol, motor oil and methanol. |
 |
| Application |
Quantity |
Part # |
| -4 AN Viton O-Rings |
10 |
651030 |
| -6 AN Viton O-Rings |
10 |
651040 |
| -8 AN Viton O-Rings |
10 |
651050 |
| -10 AN Viton O-Rings |
10 |
651060 |
| -12 AN Viton O-Rings |
10 |
651070 |
| -16 AN Viton O-Rings |
10 |
651080 |
| -4 AN Fluorosilicone O-Rings |
10 |
651031 |
| -6 AN Fluorosilicone O-Rings |
10 |
651041 |
| -8 AN Fluorosilicone O-Rings |
10 |
651051 |
| -10 AN Fluorosilicone O-Rings |
10 |
651061 |
| -12 AN Fluorosilicone O-Rings |
10 |
651071 |
| -16 AN Fluorosilicone O-Rings |
10 |
651081 |
|
|
BRAKE CRUSH WASHERS
When changing brake hoses, always replace the sealing washers that are used with Russell's Street Legal brake hoses. |
 |
| Application |
Quantity |
Part # |
| 10mm - 3/8" Brake Hose Washers |
10 |
683980 |
| 12mm - 7/16" Brake Hose Washers |
10 |
683990 |
|
|
CARBURETOR FITTING SEALING WASHERS
Always replace the sealing washers that are used for carburetor fittings when they are removed. |
 |
| Application |
Quantity |
Part # |
| Use with Holley & Demon 9/16" -24 Carb Fittings |
2 |
645210 |
| Use with Holley & Quadrajet 7/8" -20 Carb Fittings |
2 |
645220 |
| Use with Edelbrock & Carter 5/8" -20 Carb Fittings |
2 |
645230 |
| Use with Quadrajet 1" -20 Carb Fittings |
2 |
645240 |
|
|
STAT-O-SEALS
Russell Stat-O-Seals are manufactured with a Buna rubber o-ring mechanically bonded to the inside diameter of an aluminum washer. When tightened, the o-ring seal is compressed, forming a positive seal around the bolt shank. |
 |
| Application |
I.D. |
Quantity |
Part # |
| -3 AN Stat-O-Seals |
3/8" |
2 |
683880 |
| -4 AN Stat-O-Seals |
7/16" |
2 |
683890 |
| -6 AN Stat-O-Seals |
9/16" |
2 |
683900 |
| -8 AN Stat-O-Seals |
3/4" |
2 |
683910 |
| -10 AN Stat-O-Seals |
7/8" |
2 |
683920 |
|
|
WARNING: ALL products on this page can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
